Lenox | sku: BS-C-32WOOD #32 Wood MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-NEO Neo-Type MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-FLEX Flex Back MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-PM PalletMaster C MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-CS ChipSweep MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-WM Carbon Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-WMGT WoodMaster GT MSRP: Now: $0.08 Compare Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-32WOOD #32 Wood STRAIGHTER, EASIER CUTTINGManufactured with a heavier gauge (.032") flexible carbon steel material DESIGNED FOR CONTOUR CUTTING OF WOODPerfect for furniture manufacturing operations Note: Not recommended for blades shorter than 15' (4500mm) long. If... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-NEO Neo-Type STRAIGHTER, EASIER CUTThe body of this blade is heat treated for extra stability while cuttingRecommended for use at band speeds less than 4,000 feet (1,200 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWS AND SMALL CUT-OFF SAWSPerfect for... MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-FLEX Flex Back EXCELLENT FATIGUE LIFEDesigned to cut a wide variety of materialsFlexible carbon steel is very durable even at high band speeds—up to15,000 feet (4,500 meters) per minute DESIGNED FOR USE ON VERTICAL CONTOUR SAWSPerfect for utility cutting of a... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-PM PalletMaster C VARI-TOOTH® DESIGN IMPROVES BLADE LIFE AND REDUCES VIBRATIONCuts are straighter and require less force ONE PIECE STEEL CONSTRUCTION CUTS THROUGH NAILSExcellent fatigue life and extreme durability HARDENED TOOTH TIPS SURVIVE AGGRESSIVE... MSRP: Now: $0.08 Choose Options Compare Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-CS ChipSweep MINIMIZES DUST ON SAWN BOARDSUnique tooth design reduces or eliminates secondary dedusting operations CUTS STRAIGHTER AND LASTS LONGER AT HIGHER FEED RATESExceptional results in frozen wood EXTREMELY VERSATILEUsed to cut cants, dry boards, soft and... MSRP: Now: $0.10 Compare Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected × OK
Lenox | sku: BS-C-WM Carbon Ripper 37 Dakin-Flathers Ripper 37 MSRP: Now: $0.09 Choose Options Compare Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected
Lenox | sku: BS-C-WMGT WoodMaster GT EXCELLENT BLADE LIFE ON RESAWS AND PORTABLE SAWMILLSTeeth are ground and induction hardened to keep the blade sharpHigh carbon backing steel reduces band breaks and allows multiple sharpenings SMOOTH, STRAIGHT CUTS AT PRODUCTION RATESDeep gullet design... MSRP: Now: $0.08 Compare Compare Selected